|
|
Build Your Online Product Catalogs?
| Product Name: |
Manual mold silicone rubber
|
| Supply Ability: |
|
| Related proudcts |
|
| Specifications |
hy528 |
| Price Term: |
FOB£¬CNF£¬CIF |
| Port of loading: |
shenzhen |
| Minimum Order |
200kg |
| Unit Price: |
|
|
Manual mold silicone rubber
Product Description
Manual mold silicone is a flowable liquid, and the quality has nothing to do with the color. It consists of two components. Part A is a flowable liquid silicone rubber, part B is the curing agent. Firstly, after dealing with the original model, take some liquid silicone rubber , add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2-3 hours.
Product Feature
manual mold silicon rubber features with the resistance to deformation, good tensile strength as well as low shrinkage, high temperature resistance and time of reproduction ***ermined on the basis of customers.
Product Specification/Models
Specification of manual mold silicone:
HY-528# is applicable to make molds of smaller products and the reduplication will be 2-3 times.
HY-540# , co***red to other two types, for its moderate hardness and better quality & performance, its reduplication will be 20-30 times.
HY-570# is applicable to large size products duplications and Electronic equipment antivibration.
Application
Manual mold silicone rubber is mainly used for model design of manual mold, PVC plastic molds, cement products, low melting point alloy molds, alloy toys, plastic toys, electronics, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, Electronic
equipment antivibration, and so on.
Other Information
FAQs of the manual mold silicone
1.How to deal with the bubbles during the mixing process?
It depends on your practical situation. Firstly you can deal the mixture with a vacuum machine if you have one; If no such machine, you can reduce the mixing ratio of the hardener from 4% to 1%-2%.Then in the prior period of the reaction of the mixture will be slower, then the air in the mixture will exhaust by itself for a longer curing time to release the bubble.
2. The solutions of the sticky of the si |
| Company: |
Shenzhen Hongye Jie Technology Co., Ltd.
|
| Contact: |
Ms. Fannie Huang |
| Address: |
Liulian Shibi Industrial Zone,Pingdi Town,Long Gang District |
| Postcode: |
518117 |
| Tel: |
86-755-89948454 |
| Fax: |
86-755-89948030 |
| E-mail: |
|
|
|
|
Home
