|
|
Build Your Online Product Catalogs?
| Product Name: |
pad printing silicone rubber
|
| Supply Ability: |
240t/mon |
| Related proudcts |
|
| Specifications |
hy901£¬912 916 918 |
| Price Term: |
FOB£¬CNF£¬CIF |
| Port of loading: |
shenzhen |
| Minimum Order |
200kg |
| Unit Price: |
|
|
Name:HY-901Transfer Printing Silicone Rubber
Number:
HY-901
Usage:
Making the printing pads for plastic toys, craftworks, product printing.
Description:
¡¡¡¡The product with the advantages of abrasion resistance, high temperature resistance, good printing effect, etc. , which made of top-quality raw material due to adding American Dupont Teflon high-temperature resistance new material, is processed through high-temperature machining. The product is mainly applicable to plastics toys, electroplating products, electronic toys, trademarks and irregular pattern printing. The silicon pad is a carrier which transfer printing the patterns on the steel plate onto the toy products' surface.
Standard Datasheet:
Model Appearance Viscosity (cs) Hardness (Ao) Tensile Strength (kgf/c©O) Tear Strength (kgf/cm) Shrinkage (%) Elongation (%) Mixing Ratio(%) Operating Time(H) Curing Time(H)
901 r/y/g/w 25000~30000 25~28 ¡Ý35 ¡Ý16 ¡Ü0.3 ¡Ý350 2~3 0.5 2~4
Operation Instruction for Pad Printing silicone rubber
¡¡¡¡1£® Firstly,clean the mold with ***ergent, and dry up the mold by a piece of cloth or an air gun and then coat the mold with a layer of release agent.
¡¡¡¡2. The normal proportion between the pad printing silicon and the silicone oil depends on the requirements of the customers. If pattern with big area to be printed, a soft silicon pad is needed and the amount of silicone oil is increased. Contrarily, if a silicon pad with high hardness is needed, the silicone oil should be added less or not . The hardness of general pad printing silicone rubber is approximate of 15A¡ã~-25 A¡ã; if too much silicone oil is added, the silicon pad is so soft that the printing times is limited, the molecular weight of the silicon will be damaged by the silicone oil no matter how superior quality the silicon is, thereby bringing about abrasion intolerance, solvent intolerance and ageing.
¡¡¡¡3. General mixing proportion is as follows: add 30g silicone oil into 100g silicon with the hardness of the silicon pad being 20A¡ã, |
| Company: |
Shenzhen Hongye Jie Technology Co., Ltd.
|
| Contact: |
Ms. Fannie Huang |
| Address: |
Liulian Shibi Industrial Zone,Pingdi Town,Long Gang District |
| Postcode: |
518117 |
| Tel: |
86-755-89948454 |
| Fax: |
86-755-89948030 |
| E-mail: |
|
|
|
|
Home
